Micronet-technology IP TELEPHONY GATEWAY SP5052 Manual de usuario descargar pdf (Pagina 20)

Warning: Once users execute flash –clean, all the configurations of VoIP

FXO gateway will be cleaned. This can only be executed by user who log in

with root

5.6 [commit] command

Save changes after configuring the VoIP FXO gateway.

usr/config$ commit

This may take a few seconds, please wait....

Commit to flash memory ok!

usr/config$

Note:

Users should use commit to save modified value, or they will not be

activated after system reboot.

5.7 [ifaddr] command

Configure and display VoIP FXO gateway network information.

usr/config$ ifaddr

LAN information and configuration

Usage:

ifaddr [-print]|[-dhcp used]|[-sntp mode [server]]

ifaddr [-ipsharing used [deviceAddr]]

ifaddr [-ip ipaddress] [-mask subnetmask] [-gate defaultgateway]

-print Display LAN information and configuration.

-ip Specify VoIP FXO gateway ip address.

-mask Set Internet subnet mask.

-gate Specify default gateway ip address

-dhcp Set DHCP client service flag (On/Off).

-sntp Set SNTP server mode and specify IP address.

-timezone Set local timezone.

-cmcenter Set Management Center IP Address.

-ipsharing Specify usage of an IP sharing device and specify IP

address.

Note:

Range of ip address setting (0.0.0.0 ~ 255.255.255.255).

DHCP client setting value (On=1, Off=0). If DHCP set to 'On',

Obtain a set of Internet configuration from DHCP server assigned.

SNTP mode (0=no update, 1=specify server IP, 2=broadcast mode).

Example:

ifaddr -ip 210.59.163.202 -mask 255.255.255.0 -gate 210.59.163.254

ifaddr -dhcp 1

ifaddr -sntp 1 210.59.163.254

ifaddr -ipsharing 1 210.59.163.254

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 60 61

Sin comentarios

Micronet-technology IP TELEPHONY GATEWAY SP5052 Manual de usuario Pagina 20