Micronet-technology SP906GK Manual de usuario Pagina 1

User’s Manual Wireless LAN PCI Adapter Model No.: SP906GK http://www.micronet.info

- 7 -Right click the icon to find the items in configuration utility for you to perform. z Launch Config Utilities Select “Open Config Utility”

- 8 - B. Click “Advanced”. C. Uncheck “Use Windows to configure my wireless network settings” to enable the utility for the card. Note: If “Wi

- 9 -3.1 Site Survey When you open the Configuration Utility, the system will scan all the channels to find all the access points/stations within

- 10 -Add/Delete/Edit/Activate a profile. Parameter Description Profile List The profile list displays all the profiles and their relative se

- 11 -3.2.1 Configure the Profile 3.2.1.1 Base Configuration Parameter Description Profile Name Define a recognizable profile name for you to

- 12 -3.2.1.2 Wireless network security Parameter Description Network Authentication Type This setting has to be consistent with the wireless

- 13 -password in their access point or gateway, as well as in each wireless station in the network. WPA-PSK takes over automatically from that p

- 14 - 802.1x Setting When you set the Authentication Type to Open, Shared, WPA or WPA2, you can also enable IEEE 802.1x setting to use the aut

- 15 -The IEEE 802.1X specification describes a protocol used for authenticating both clients and servers on a network. The authentication algori

- 16 -3.2.1.3 802.1x Setting-Certification Parameter Description Authentication Type The EAP authentication protocols this card supports are l

CONTENTS 1 INTRODUCTION... 1 1.1 Features...

- 17 - Session Resumption Select from “Disabled”, “Reauthentication”, “Roaming”, “SameSSID” and “Always” options when you want to recover the s

- 18 - Allow Intermediate Certificates When the server designates an issuer as a trusted root authority, it places the issuer's self-signed

- 19 -3.3 Advanced Parameter Description PSM (Power Save Mode) The power saving function is only available when the network type is in Infras

- 20 -Preamble The preamble defines the length of the CRC block for communication among wireless devices. This option is only active in the Ad H

- 21 -3.4 Status From the “Status” option, you can view all the information of the network you are connected to. Parameter Description Manufac

- 22 -3.5 Statistics This option enables you to view the statistic information of the connection, including transmit statistics and receive stati

- 23 -compressing the data and decreasing the waiting time for sending the next data to the Routers or APs. This feature (known as Turbo Mode) e

- 24 -4 Troubleshooting This chapter provides solutions to problems commonly encountered during the installation and operation of the adapter.

- 25 -database, or wireless application for mobile workers. 6. What is BSS ID？ A specific Ad hoc LAN is called a Basic Service Set (BSS). Compu

- 26 - 13. What is Spread Spectrum？ Spread Spectrum technology is a wideband radio frequency technique developed by the military for use in relia

- 1 -1 Introduction Thank you for purchasing the SP906GK. It complies with IEEE 802.11g standard and supports up to 54Mbps high-speed wireless ne

- 27 -Copyright 2006 Micronet Communications, Inc. All rights reserved. No Part of the contents of this guide maybe transmitted or reproduced in

- 28 -transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. R&TTE Compliance Statement This

- 1 -1.1 Features • Comply with the IEEE 802.11b and IEEE 802.11g standards. • High-speed wireless transfer data rate - up to 54Mbps. • Provi

- 2 -1.3 Package Contents Before you begin the installation, please check the items in your package. The package should include the following ite

- 3 -2 Hardware Installation Before you proceed with the installation, please read the following notes carefully: Note1: Please do not install S

- 4 -D. After selecting the country domain, click “Next” to process the installation.. E. Warning: Selecting incorrect region may result in a

- 5 - G. The system will automatically detect SP906GK and display the “Hardware Installation” screen. Click “Continue Anyway” to continue.

- 6 -3 Configuration Utility The Configuration Utility is a powerful application that helps you configure SP906GK and monitor the link status an