Micronet-technology SP3367N Manual de usuario

User’s Manual 11N ADSL2+ Modem Router Model No.: SP3367N http://www.micronet.info 1

2.2 Front Panel LED Status Description PWR On Device is switched on. Off Wireless LAN disabled. WLAN Blinking Wireless transmission detected.

Chapter 3 System and Network Setup 3.1 Build Network Connection Please follow the following instruction to build the network connection between the

3. Connect the A/C power adapter to the wall socket, and then connect it to the ‘Power’ socket of the router. 4. The ADSL LED will be ON if the

3. Check the list of Network Components. If TCP/IP is not installed, click the <Add> button to install it. If TCP/IP is installed, go to step

b) Windows 2000 1. Click the <Start> button and select <Settings>, then click <Control Panel>. The Control Panel window will appear

2. Double-click <Local Area Connection> icon. The Local Area Connection window will appear. 3. Check the list of Network Components. Users sho

2. Select <Obtain an IP address automatically> and <Obtain DNS server address automatically>, then click <OK>. 13

3.2.2 Router’s IP Address 1. After the IP address setup is complete, please click <Start> then <Run> at the bottom lower corner of the d

3.2.3 Starting Web-Based Management UI 1. After the computer has obtained an IP address from router, please start the web browser. Input the IP a

16

Table of Contents Chapter 1 Introduction... 2 1.1 Package Contents..

Chapter 4 Web-Based Management UI 4.1 Quick Start Wizard The Quick Start section is designed to get the broadband router running as quickly as poss

Step 2: Time Zone The Time Zone allows router to base its time on the settings configured in this section. Click on <NEXT> to proceed to

Step 3: Broadband Type In this section users have to select one of four types of connections that it will be using to connect to broadband router WAN

Step 4 Enter the Internet account details provided by ISP Click <Next> to complete the Quick Start Wizard and restart modem router. 4.2 Inte

ATM VC Parameter Description Virtual Circuit VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier define a virtual circuit. VPI VPI

ATM QoS CBR (Constant Bit Rate) – This class is used for emulating circuit switching. The cell rate is constant with time. Select CBR to specify fixe

Parameter Description Service Name Enter the name of your ISP. User Name Enter the username exactly as your ISP assigned. Password Enter the pas

Dynamic Route Dynamic routing allows routing tables in routers to change as the possible routes change. This router supports RIP1, RIP2-B and RIP2-M

Dynamic Route Dynamic routing allows routing tables in routers to change as the possible routes change. This router supports RIP1, RIP2-B and RIP2-M

4.2.3 Wireless Access Point Settings Parameter Description Access Point Activated or deactivated the wireless function of the router. When it is

4.4.4 UPnP ...41 4.4.5 DDNS ...

DTIM Determines the interval the Access Point will send its broadcast traffic. The range is from 1 to 255 and the default value is 3 beacons. Wireles

Broadcast SSID Select “Yes” to make the SSID to be visible so wireless clients can scan the router within the network. Select “No” if you want to hid

Authentication Type It’s very important to set wireless security settings properly. If not enabled, hackers and malicious users can reach your networ

Wireless MAC Address Filter Parameter Description Active This router can prevent the wireless clients from accessing the wireless network by checkin

4.3 Advanced Setup 4.3.1 Firewall Parameter Description Firewall When you enable the firewall function, it will protect you from following attacks

Routing Table List Users can see the current routing table of the router here. If they want to add another routing rule, please click “ADD ROUTE”. P

IP Subnet Mask Enter the Subnet Mask address of the destination LAN. Gateway IP Address This is the gateway IP Address where packets are sent. Enter

DMZ The DMZ Host is a local computer exposed to the Internet. When setting a particular internal IP Address as the DMZ Host, all incoming packets wil

Parameter Description Virtual Server for Show the Virtual Server setting is for single or multiple IP Addresses. Rule Index Choose the rule numbe

4.3.4 ADSL Parameter Description ADSL Mode The default setting is “Auto Sync-Up”. This mode will automatically detect the ADSL mode including ADSL

Certifications FCC This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two cond

4.4 Access Management 4.4.1 ACL If users want to restrict users from accessing certain Internet applications/services such as Internet websites, emai

4.4.2 Filter Users can forbid some users from accessing the router by filtering IP Address or MAC Address. Users can also restrict some applications

Parameter Description IP/MAC Filter Set Index This is the item number to record the setting. Interface Select which channel (PVC) to configure. Dir

Parameter Description Application Filter Activate or deactivate the application filter. ICQ/MSN/YMSG/ Real Audio/Video If “Allow” is selected, th

URL A URL can be thought of as the "address" of a web page and is sometimes referred to informally as a "web address." Please ent

Parameter Description UPnP Activated or deactivated the UPnP function. Auto-configured Select this check box to allow UPnP-enabled applications

Parameter Description Dynamic DNS Activated or deactivated the DDNS function. Service Provider This router supports DynDNS service provider. My Ho

4.5 Maintenance 4.5.1 Administrator Parameter Description Username The username of the router is “admin” by default. New Password Enter up to 30

Parameter Description Current Date/Time Show the current date/time of the router. Synchronize time with NTP Server Automatically – Set the time aut

4.5.4 System Restart In this interface, users can restart the router or restore to factory defaults. If users wish to restart the router using the fa

Chapter 1 Introduction Micronet SP3367N, 11N ADSL2+ Modem Router, delivers highly reliable and scalable network environment. The model has incorpora

4.6 Status 4.6.1 Device Info In this interface, it will show the device information including firmware, MAC Address, LAN and WAN settings and also th

4.6.3 Statistics Show the statistics of transmitted and received packets on the LAN port, ADSL line or WLAN port. 48

Chapter 5 Glossary 10Base-T It is an Ethernet standard for Local Area Network (LAN). 10Base-T uses a twisted pair cable with maximum length of 100 m

Default Gateway (Router) Every non-router IP device needs to configure a default gateway’s IP address. When the device sends out an IP packet, if the

Idle Timeout Idle Timeout is designed so that after there is no traffic to the Internet for a pre-configured amount of time, the connection will auto

Application Protocol Port NumberTelnet TCP 23 FTP TCP 21 SMTP TCP 25 POP3 TCP 110 H.323 TCP 1720 SNMP UCP 161 SNMP Trap UDP 162 HTTP TCP 80 PPTP TC

RFC Request for Comments. The document (begun in 1969) is for describing the Internet suite of protocols and related experiments. Not all RFCs descr

It is the virtual terminal protocol in the Internet suite of protocols. Allows users of one host to log into a remote host and act as normal terminal

¾ PPP over AAL5 (RFC 2364). ¾ PPP over Ethernet (RFC 2516). y Support 802.11n Wireless Access Point ¾ Complies with IEEE 802.11n draft 2.0, IEE

y If users want to place this router at high places, please make sure the router is firmly secured. Falling from high places would damage the router

Sharing z Virtual Server z DMZ z VPN Pass Through (IPSec/PPTP) z SPI Anti-DOS Firewall z ACL (Access Control) z IP/MAC/Application/URL Filter z

Chapter 2 Physical Description 2.1 Back Panel Parameter Description Antenna ConnectorThe antenna connector of the router is reverse SMA connector.